Hondash
Contains adsIn-app purchases
4.7star
776 reviews
100K+
Downloads
Everyone
info
About this app
Hondash is the most capable monitoring tool and virtual dash for Honda (OBD1, OBD2A, OBD2B), compatible with:
- Hondash OBD Bluetooth scanner for '92 - '01 models that use the proprietary 3 pin or 5 pin diagnostic connector (can be purchased at http://www.hondash.net)
- Hondata (S300, KPro, FlashPRo), all ECU versions with a Bluetooth transmitter
- HTS - eCtune via an internally installed Bluetooth module
App features:
- real-time digital dash
- fuel statistics - instantaneous and average fuel consumption, total consumed fuel and cost
- configurable multiple trip monitors for keeping record of various statistics such as fuel consumption, trip time, distance, VTEC engaged distance, top and average speed, etc.
- real-time parameter values:
vehicle speed, engine speed - revs, engine idle speed commanded, engine coolant temperature, intake air temperature, manifold absolute pressure, baro pressure, throttle position, battery voltage, oxygen sensor voltage, alternator FR, electrical load detector, exhaust gas recirculation EGR, short / long term fuel trim, injection duration, ignition advance, idle air control valve, knock, fuel system status, calculated load value
two-state values:
starter switch, A/C switch, A/C clutch relay, P/S oil pressure switch, brake switch, VTEC pressure switch, VTEC valve, VTEC indication lamp, A/T gear position, service check, fuel pump relay, oxygen sensor heater, oxygen sensor feedback loop status, EVAP purge control, malfunction indicator lamp, alternator control, radiator fan control, intake air bypass valve
estimated values:
air fuel ratio (lambda), fuel flow, injector duty, injector flow rate, engaged gear
- configurable parameter alarm triggers (engine temperature too high etc.)
- configurable on-screen graphs
- datalogging tool - continuous recording of all parameters and car GPS position for detailed analysis, export to .csv file format
- engine diagnostics tool - read and clear DTC fault codes
- calibration tools - fuel consumption, vehicle speed, gearbox ratios
- car dynamics measurement tools - acceleration (0-100 kph, etc., 1/4 mile drag run), deceleration (100-0 kph, etc.)
- shift-light with audio-visual indication and individual gear shift point configuration
- Head Up Display (HUD) mode
- daytime and nighttime color scheme
- support for metric and imperial units
- Hondash OBD Bluetooth scanner for '92 - '01 models that use the proprietary 3 pin or 5 pin diagnostic connector (can be purchased at http://www.hondash.net)
- Hondata (S300, KPro, FlashPRo), all ECU versions with a Bluetooth transmitter
- HTS - eCtune via an internally installed Bluetooth module
App features:
- real-time digital dash
- fuel statistics - instantaneous and average fuel consumption, total consumed fuel and cost
- configurable multiple trip monitors for keeping record of various statistics such as fuel consumption, trip time, distance, VTEC engaged distance, top and average speed, etc.
- real-time parameter values:
vehicle speed, engine speed - revs, engine idle speed commanded, engine coolant temperature, intake air temperature, manifold absolute pressure, baro pressure, throttle position, battery voltage, oxygen sensor voltage, alternator FR, electrical load detector, exhaust gas recirculation EGR, short / long term fuel trim, injection duration, ignition advance, idle air control valve, knock, fuel system status, calculated load value
two-state values:
starter switch, A/C switch, A/C clutch relay, P/S oil pressure switch, brake switch, VTEC pressure switch, VTEC valve, VTEC indication lamp, A/T gear position, service check, fuel pump relay, oxygen sensor heater, oxygen sensor feedback loop status, EVAP purge control, malfunction indicator lamp, alternator control, radiator fan control, intake air bypass valve
estimated values:
air fuel ratio (lambda), fuel flow, injector duty, injector flow rate, engaged gear
- configurable parameter alarm triggers (engine temperature too high etc.)
- configurable on-screen graphs
- datalogging tool - continuous recording of all parameters and car GPS position for detailed analysis, export to .csv file format
- engine diagnostics tool - read and clear DTC fault codes
- calibration tools - fuel consumption, vehicle speed, gearbox ratios
- car dynamics measurement tools - acceleration (0-100 kph, etc., 1/4 mile drag run), deceleration (100-0 kph, etc.)
- shift-light with audio-visual indication and individual gear shift point configuration
- Head Up Display (HUD) mode
- daytime and nighttime color scheme
- support for metric and imperial units
Updated on
Safety starts with understanding how developers collect and share your data. Data privacy and security practices may vary based on your use, region, and age. The developer provided this information and may update it over time.
No data shared with third parties
Learn more about how developers declare sharing
This app may collect these data types
Personal info, Financial info and 2 others
Data is encrypted in transit
You can request that data be deleted
Ratings and reviews
4.7
713 reviews
Leo Levich
- Flag inappropriate
March 16, 2021
Amazing. I didn't think I would be able to find such a device for my 92 civic, but this is the real deal. Very surprised at the amount of parameter available. I was already able to diagnose the vehicle speed sensor in relation to my jumping speedo. Seriously awesome device and app. One request would be to have some log of alarms. My car seems to be slipping out of acceptable fuel trims, but I can only catch that alarm, if looking at the app right when it happens.
16 people found this review helpful
Hondash
March 17, 2021
Thank you for your feedback. Triggered alarms can be examined in the datalog as well.
https://www.hondash.net/2017/03/datalogging.html
matt beeler
- Flag inappropriate
February 28, 2022
I was having some issues with the tutorial and the support staff emailed me back within one hour I was super surprised and very glad to have the representative reach out to me and helped me work through the issue. The app is working great now and it is the best thing for a nun chipped ECU that you can get it even does data logging and 0 to 60 and quarter miles and they're super accurate
A Google user
- Flag inappropriate
November 7, 2019
Perfect for my stock standard 1999 S2000 which has the three wire data bus connector. Dongle plugged straight in, logged on to App and I can read all available engine parameters and graph them on the App. It works exactly as the screen shots show on the App website. The default display is great and speed and revs are spot on. Only problem is making sure I keep an eye on the road instead of looking at the display. The data logging is awesome. It logs all data even if the parameter is not selected for the screen. Only addition I would like to see is the ability to download the extensive log file to Excel. Even so, using the zoom feature on the phone allows you to see high detail on a small screen.. I have been told by developer the ability to download to Excel is coming. With this it would be perfection.
17 people found this review helpful
What's new
- added support for Hondata - all ECU versions with an internal Bluetooth module (S300, KPro, FlashPro)
- data-logs can be now exported as .CSV files
- added engine feature list in the engine settings category for filtering out unsupported parameters
- last car location activity now draws and updates the air distance to the last recorded car position in real time, relative to the current location
- color in the color picker can be now changed directly by editing the hex code
- data-logs can be now exported as .CSV files
- added engine feature list in the engine settings category for filtering out unsupported parameters
- last car location activity now draws and updates the air distance to the last recorded car position in real time, relative to the current location
- color in the color picker can be now changed directly by editing the hex code
